So far, the UDP core module implemented only IPv4 multicast support.
This patch extends the module with the features necessary for socket
layers on top to implement IPv6 multicast support as well:
o If a UDP PCB is bound to an IPv6 multicast address, a unicast source
address is selected and used to send the packet instead, as is
required (and was the case for IPv4 multicast already).
o Unlike IPv4's IP_MULTICAST_IF socket option, which takes a source
IPv4 address, the IPV6_MULTICAST_IF socket option (from RFC 3493)
takes an interface identifier to denote the interface to use for
outgoing multicast-destined packets. A new pair of UDP PCB API
calls, udp_[gs]et_multicast_netif_index(), are added to support
this. The new definition "NETIF_NO_INDEX" may be used to indicate
that lwIP should pick an interface instead.
IPv4 socket implementations may now also choose to map the given
source address to an interface index immediately and use the new
facility instead of the old udp_[gs]et_multicast_netif_addr() one.
A side effect of limiting the old facility to IPv4 is that for dual-
stack configurations with multicast support, the UDP PCB size is
reduced by (up to) 16 bytes.
o For configurations that enable loopback interface support, the IPv6
code now also supports multicast loopback (IPV6_MULTICAST_LOOP).
o The LWIP_MULTICAST_TX_OPTIONS opt.h setting now covers both IPv4
and IPv6, and as such is no longer strictly linked to IGMP. It is
therefore placed in its own lwIP options subgroup in opt.h.
The IPV6_MULTICAST_HOPS socket option can already be implemented using
the existing IP_MULTICAST_TTL support, and thus requires no additional
changes. Overall, this patch should not break any existing code.
This commit adds support in if_indextoname() to return ENXIO when
no interface is found. This conforms to the Open Group/RFC 3493
specification
In order to leverage errno set support, the set_errno macro from
sockets.c was moved to sockets_priv.h
This commit introduces a sockets_priv.h header for socket API internal
implementations intended to be used by sockets API C files, but not
applications
This commit moves struct lwip_setgetsockopt_data to the private header
because this is not part of the public sockets API, but needs to be
shared between sockets.c and memp.c
This header lays ground work for sharing other internal sockets types
/macros between API files (sockets.c and if_api.c)
This fixes the following build failure with MSVC 2013:
sockets.c(323): warning C4242: '=' : conversion from 'const u32_t' to 'u8_t', possible loss of data
This casts sin6_scope_id to a u8_t before calling ip6_addr_set_zone()
This patch adds full support for IPv6 address scopes, thereby aiming
to be compliant with IPv6 standards in general and RFC 4007 in
particular. The high-level summary is that link-local addresses are
now meaningful only in the context of their own link, guaranteeing
full isolation between links (and their addresses) in this respect.
This isolation even allows multiple interfaces to have the same
link-local addresses locally assigned.
The implementation achieves this by extending the lwIP IPv6 address
structure with a zone field that, for addresses that have a scope,
carries the scope's zone in which that address has meaning. The zone
maps to one or more interfaces. By default, lwIP uses a policy that
provides a 1:1 mapping between links and interfaces, and considers
all other addresses unscoped, corresponding to the default policy
sketched in RFC 4007 Sec. 6. The implementation allows for replacing
the default policy with a custom policy if desired, though.
The lwIP core implementation has been changed to provide somewhat of
a balance between correctness and efficiency on on side, and backward
compatibility on the other. In particular, while the application would
ideally always provide a zone for a scoped address, putting this in as
a requirement would likely break many applications. Instead, the API
accepts both "properly zoned" IPv6 addresses and addresses that, while
scoped, "lack" a zone. lwIP will try to add a zone as soon as possible
for efficiency reasons, in particular from TCP/UDP/RAW PCB bind and
connect calls, but this may fail, and sendto calls may bypass that
anyway. Ultimately, a zone is always added when an IP packet is sent
when needed, because the link-layer lwIP code (and ND6 in particualar)
requires that all addresses be properly zoned for correctness: for
example, to provide isolation between links in the ND6 destination
cache. All this applies to packet output only, because on packet
input, all scoped addresses will be given a zone automatically.
It is also worth remarking that on output, no attempt is made to stop
outgoing packets with addresses for a zone not matching the outgoing
interface. However, unless the application explicitly provides
addresses that will result in such zone violations, the core API
implementation (and the IPv6 routing algorithm in particular) itself
will never take decisions that result in zone violations itself.
This patch adds a new header file, ip6_zone.h, which contains comments
that explain several implementation aspects in a bit more detail.
For now, it is possible to disable scope support by changing the new
LWIP_IPV6_SCOPES configuration option. For users of the core API, it
is important to note that scoped addresses that are locally assigned
to a netif must always have a zone set; the standard netif address
assignment functions always do this on behalf of the caller, though.
Also, core API users will want to enable LWIP_IPV6_SCOPES_DEBUG at
least initially when upgrading, to ensure that all addresses are
properly initialized.
It is better to present correct IP types in netconn API.
Netconn API now accepts IPv6 mapped IPv4 addresses as well as IPv6 and IPv4 in send(), bind() and connect(), but does NOT map IPv4 to IPv6 mapped IPv4 in getaddr() and receive() functions.
Let lwip use functions/macros prefixed by lwip_ internally to avoid naming clashes with external #includes.
Remove over-complicated #define handling in def.h
Make functions easier to override in cc.h. The following is sufficient now (no more LWIP_PLATFORM_BYTESWAP):
#define lwip_htons(x) <your_htons>
#define lwip_htonl(x) <your_htonl>
Simon and I think it can be removed - the receive window handling get a little less precise, but that should be OK for a lightweight stack.
Receive window is now updated with the whole pbuf size (instead of only count of read bytes from socket) as soon as socket implementation gets a pbuf from netconn layer.
Work on bug #47512: MPU_COMPATIBLE may fail on empty pool (still not finished)
This commit optimizes the sendmsg UDP pbuf chain creation by not
allocating/freeing a netbuf per io vector and instead building a pbuf
chain directly in the sockets layer
