We don't have to keep a helper function just for the sake of a PBUF_RAW
constant. Inline ppp_singlebuf function.
Signed-off-by: Sylvain Rochet <gradator@gradator.net>
User should not use ppp_connect or ppp_listen return value to retry
later, it must wait for the callback to be called. This is primarily
done this way to have a consistent behavior with and without the
holdoff feature.
Remove returned error value from PPP link level API connect and listen
callbacks because we are not using them anymore, then make ppp_connect
or ppp_listen to always return ERR_OK, thus we are not breaking the PPP
user API.
We don't need the return code here, all PPP link level drivers can't
fail at all (e.g. PPPoS) or retry if necessary (PPPoE and PPPoL2TP).
Remove unnecessary cleanup at the end of session, cleanup as much as
possible in the connect callback instead. It follows what PPPoE is
currently doing and it makes everything simpler to read.
This function only set PPP to initialize phase, and it is only called at
the very beginning of functions where it is called. It means we could
as well set the initialize phase before calling those functions in the
PPP core.
L2TP state can't be anything else than initial state in
pppol2tp_connect, this function is called from PPP core only when PPP
is in the dead phase, if PPP is in the dead phase it means the link
protocol is dead as well.
L2TP can't be anything else than data phase in pppol2tp_xmit, this
function is only called by pppol2tp_write and pppol2tp_netif_output
which are both called by PPP core only when PPP session is up, if
PPP session is UP it means the link protocol is UP as well.
L2TP can't be anything else than data phase in pppol2tp_disconnect,
this function is only called by PPP core only when PPP session is up,
if PPP session is UP it means the link protocol is UP as well.
PPP is just the upper protocol for PPPoE and PPPoL2TP, meaning it is only
started once "E" or L2TP is established. Therefore waiting indefinitely
for LCP packets on the PPP side does not make sense at all, if the lower
level protocol is UP, PPP *MUST* comes up as well or we should restart from
the beginning.
This function does not clear anything anymore. What it is now is an
optional way to notify PPP that link layer is started, changing the
PPP state from "dead" to "initialize". Rename it accordingly to what
the function really is.
Unfortunately, all functions were renamed when PolarSSL was renamed to
mbed TLS, breaking the API. In order to continue supporting our embedded
PolarSSL copy while allowing our users to use mbed TLS, we need a function
map to deal with the API break.
This commit add a function map for all hashes and ciphers we are currently
using.
Create special IP address type "IPADDR_TYPE_ANY" for it.
SNMP uses new feature in non-netconn mode.
TODO: Same for TCP & RAW, adapt NETCONN to use this feature
ppp_free() calls the low level protocol destroy function, pppol2tp_destroy()
here, which freed the l2tp pcb, followed by pppol2tp_create which also freed
the pcb.
Fixing it by reordering the L2TP init so we don't have to call ppp_free()
anymore.
Signed-off-by: Sylvain Rochet <gradator@gradator.net>
Check tot_len for ZLB instead of len, it might happens we are just
between 2 pbuf, although almost impossible.
Check buffer is at least 2 byte long before checking address & flags
header.
We need to do VJ compression before CCP/MPPE compression and VJ
decompression after CCP/MPPE decompression. This leads to a massive
rewrite of how we currently handled VJ only in the PPPoS lower protocol
handler.
Moved VJ structures from pppos to ppp_pcb because we need them back in
PPP core. This is a bit unfortunate because that's not necessary for
PPPoE or PPPoL2TP, but, hey!. Fixed CCP+MPPE+VJ order.
Removed ppp_singlebuf() in pppol2tp_input(), chained pbuf are perfectly
acceptable for IP data and we are currently supporting them perfectly
for PPPoS. The PPP stack itself (LCP, IPCP et al.) does not support
chained pbuf and is already calling ppp_singlebuf() just before passing
packet to the protocol handler.
Added ppp_singlebuf() in pppol2tp_dispatch_control_packet() because we
do not support chained pbuf in L2TP control packet.
We don't need anymore an input function for ip4 and an input function
for ip6, work to achieve that was partially done by ce7e31cd.
pppol2tp_input() is now only called by pppol2tp_input_ip(), finishing
dual stack support by merging pppol2tp_input_ip() into pppol2tp_input().
Replaced ip4_addr_t to ip_addr_t in pppapi_pppol2tp_create() prototype,
now binding to UDPv6 or UDPv4 depending on the passed ip_addr_t type.
Removed pppol2tp_create_ip6() and pppapi_pppol2tp_create_ip6().
ip_addr_t is used for all generic IP addresses for the API, ip(4/6)_addr_t are only used internally or when initializing netifs or when calling version-related functions
lwip/src/netif/ppp/pppol2tp.c: In function ‘pppol2tp_udp_send’:
lwip/src/netif/ppp/pppol2tp.c:1229:3: warning: ‘err’ may be used uninitialized in this function [-Wmaybe-uninitialized]
return err;
^
