We don't have to keep a helper function just for the sake of a PBUF_RAW
constant. Inline ppp_singlebuf function.
Signed-off-by: Sylvain Rochet <gradator@gradator.net>
pbuf_coalesce() creates a single pbuf out of a chain of pbufs, which is
exactly what ppp_singlebuf() need.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Sylvain Rochet <gradator@gradator.net>
User should not use ppp_connect or ppp_listen return value to retry
later, it must wait for the callback to be called. This is primarily
done this way to have a consistent behavior with and without the
holdoff feature.
Remove returned error value from PPP link level API connect and listen
callbacks because we are not using them anymore, then make ppp_connect
or ppp_listen to always return ERR_OK, thus we are not breaking the PPP
user API.
We don't need the return code here, all PPP link level drivers can't
fail at all (e.g. PPPoS) or retry if necessary (PPPoE and PPPoL2TP).
netif_ip6_addr_set_state() relies on being able to access the old
address on invalidation, for example in order to invalidate PCBs
and leave the correct solicited-node MLD group.
ppp/utils.c: In function 'ppp_vslprintf':
ppp/utils.c:251:12: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast]
val = (unsigned long) va_arg(args, void *);
^
This is because a void* type is casted into an unsigned long type,
which obviously isn't correct on LLP64 systems such as Windows.
Actually, we are not using %p, thus we remove %p support completely
instead of trying to fix the issue in unused code.
Art says:
pppos_input() can call ppp_input() which can call pppos_disconnect() to
disconnect the interface. However, it will continue to read in
characters and allocate a pbuf from the PBUF_POOL and keep it in
pppos->in_head and in_tail. When a re-connect happens and pppos_connect()
is called, this pppos->in_head and in_tail are zeroed, hence a memory
leak. (This happens with PPP_INPROC_IRQ_SAFE not defined.)
A fix would be inside pppos_input() to break out of the loop inputting
characters after calling ppp_input() if pppos->open == 0. Note that
the loop is not even entered if pppos->open == 0.
ppp_input(ppp, inp);
if(pppos->open == 0) //get out if they disconnected
break;
Fix it in a similar way which doesn't add new code by moving the
existing pppos->open check inside the byte loop.
This is done in the pppd upstream and was disabled because we don't have
the allowed addresses list required for the auth_ip_addr function.
This is mostly necessary for PPP in server mode to prevent the peer to
use the IP address it wants instead of the one we want, which is
currently allowed.
Rewrite auth_ip_addr in a simple way where we forbid PPP peer to use
loopback net, a multicast address or a reserved class address. Added
to that we consider that PPP in server mode with peer required to
authenticate must provide the peer IP address, reject any IP address
wanted by peer different than the one we wanted. This is actually
an allowed addresses "list" of one entry that follows what is done
in the unused auth_ip_addr function.
Commit 7df5496e7b revealed a regression introduced in commit 5a71509353
which broke IPCP reset state.
ask_for_local was set to 0 if ouraddr initial value is 0, if
ask_for_local was false go->ouraddr was cleared in reset callback,
commit 5a71509353 breaks it by removing this clearing. This regression
was silent because the whole ppp pcb runtime data was cleared before
reconnecting until commit 7df5496e7b which removed this giant clearing.
Fix it by reintroducing ask_for_local boolean value, with proper initial
value following what unused function ip_check_options do.
Fixes: 7df5496e7b ("PPP, rework initial/reconnect cleanup")
Fixes: 5a71509353 ("PPP, CORE, IPCP: removed useless ask_for_local boolean")
Let lwip use functions/macros prefixed by lwip_ internally to avoid naming clashes with external #includes.
Remove over-complicated #define handling in def.h
Make functions easier to override in cc.h. The following is sufficient now (no more LWIP_PLATFORM_BYTESWAP):
#define lwip_htons(x) <your_htons>
#define lwip_htonl(x) <your_htonl>
Fix below build errors:
In file included from ../../../../../lwip/src/include/netif/ppp/ppp_opts.h:31:0,
from ../../../../../lwip/src/netif/ppp/pppoe.c:71:
../../../../../lwip/src/netif/ppp/pppoe.c: In function ‘pppoe_timeout’:
../../../../../lwip/src/netif/ppp/pppoe.c:861:30: error: ‘ethbroadcast’ undeclared (first use in this function)
MEMCPY(&sc->sc_dest, ethbroadcast.addr, sizeof(sc->sc_dest));
^
../../../../../lwip/src/include/lwip/opt.h:137:52: note: in definition of macro ‘MEMCPY’
#define MEMCPY(dst,src,len) memcpy(dst,src,len)
^
../../../../../lwip/src/netif/ppp/pppoe.c:861:30: note: each undeclared identifier is reported only once for each function it appears in
MEMCPY(&sc->sc_dest, ethbroadcast.addr, sizeof(sc->sc_dest));
^
../../../../../lwip/src/include/lwip/opt.h:137:52: note: in definition of macro ‘MEMCPY’
#define MEMCPY(dst,src,len) memcpy(dst,src,len)
^
../../../../../lwip/src/netif/ppp/pppoe.c: In function ‘pppoe_connect’:
../../../../../lwip/src/netif/ppp/pppoe.c:899:24: error: ‘ethbroadcast’ undeclared (first use in this function)
MEMCPY(&sc->sc_dest, ethbroadcast.addr, sizeof(sc->sc_dest));
^
../../../../../lwip/src/include/lwip/opt.h:137:52: note: in definition of macro ‘MEMCPY’
#define MEMCPY(dst,src,len) memcpy(dst,src,len)
^
../../Common.mk:94: recipe for target 'pppoe.o' failed
make: *** [pppoe.o] Error 1
Fixes: 8eb9db18a2d9 ("Reduce usage of netif/ethernet.h header, mostly lwip/prot/ethernet.h is sufficient")
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: goldsimon <goldsimon@gmx.de>
The check for link up was missing, meaning valid LCP echo request/reply
packets are filtered whatever the PPP state is, despite what the comment
says.
Fix it by checking the PPP state as we would like to have done when it
was written.
VJ packets, Compressed packets, IPv4 and IPv6 packets are useless in
the PPP packet dump. We properly filtered IPv4 and IPv6 packets but
we forgot filtering VJ and Compressed packets.
Improve the filtering rule to filter packets which are not auth
protocol (< 0xC000) and which are not control protocol (0x8000 bit
not set).
If LCP is not started yet, we are only closing the link protocol, in
this case we have to set the disconnect state ourself because PPP
is not actually started yet.
pppoe_softc_list is always not null when pppoe_find_softc_by_session is
called, furthermore pppoe_softc_list being null here does not hurt.
session is still checked whatsoever in pppoe_find_softc_by_session,
prechecking the session value for a value which can't really happen
except for forged frames does not add any value.
Remove unnecessary cleanup at the end of session, cleanup as much as
possible in the connect callback instead. It follows what PPPoE is
currently doing and it makes everything simpler to read.
Instead of relying on cleanup at the end of session, cleanup as much as
possible in the connect callback. It removes duplicated code and make
everything simpler to read.
While we are at it, remove useless initialization code from create
and connect functions.
ppp_close might try to close LCP even if LCP is not started, it happens
because because the PPP session might be waiting for the link protocol
to come up and we do not check that.
We say in the PPP documentation that ppp_close() can be called anytime,
so, if link protocol is currently trying to connect, we must cancel
the link connection.
Fix it by calling the link protocol disconnect callback if LCP is not
started yet.
Disconnect callback does not currently support a disconnect event while
initiation is in progress. Retry timer is not stopped and PADT frame is
sent whatever the current state is. PADT frame can only be sent if we
received a PADS frame, otherwise sc_session is 0 and sending a PADT
frame is meaningless.
Fix both issues to allow calling the disconnect callback whatever the
PPPoE state is.
We say in the PPP documentation that ppp_close() can be called anytime,
as of today, this is not entirely true, there are still conditions that
are not handled properly.
If PPP is already disconnecting, ppp_close() must do nothing and returns
ERR_INPROGRESS instead of messing up the PPP disconnection state.
PPP_PHASE_MASTER state is only used if multilink mode is enabled. Since
we don't support multilink mode checking for this state only add some
code for no value added at all.
Build-out PPP_PHASE_MASTER state check if multilink mode is disabled.
Van Jacobson TCP header compression only apply if TCP is enabled,
therefore we need to disable VJ compression if TCP is disabled.
We already have conditions to enforce VJ disabling if IPv4 is disabled
or if PPPoS is disabled, add TCP to those conditions and remove
unecessary VJ_SUPPORT && LWIP_TCP conditions.
This function only set PPP to initialize phase, and it is only called at
the very beginning of functions where it is called. It means we could
as well set the initialize phase before calling those functions in the
PPP core.
PPP is currently in initialize phase until authentication is started
or until we start IPCP negotiation.
It works, because PPP states are mostly used for user information, most
state are actually useless for PPP itself. Being in initialize state
while PPP is started is not very consistent, switch to establish phase
before starting LCP.
sc->sc_ethif can't be NULL, it is set definitively in pppoe_create.
PPPoE can't by anything else than PADI sent in pppoe_send_padi, it
is only called when this is true.
PPPoE state can't be anything else than initial state in
pppoe_connect, this function is called from PPP core only when PPP
is in the dead phase, if PPP is in the dead phase it means the link
protocol is dead as well.
PPPoE can't be anything else than data phase in pppoe_disconnect
this function is only called by PPP core only when PPP session is up,
if PPP session is UP it means the link protocol is UP as well.
PPPoE can't by anything else than PADR sent in pppoe_send_padr, it
is only called when this is true.
PPPoE can't by anything else than PADO sent in pppoe_send_pado, it
is only called when this is true.
PPPoE can't by anything else than PADO sent in pppoe_send_pads, it
is only called when this is true.
PPPoE can't be anything else than session phase in pppoe_xmit,
function is only called by pppoe_write and pppoe_netif_output
which are both called by PPP core only when PPP session is up, if
PPP session is UP it means the link protocol is UP as well.
L2TP state can't be anything else than initial state in
pppol2tp_connect, this function is called from PPP core only when PPP
is in the dead phase, if PPP is in the dead phase it means the link
protocol is dead as well.
L2TP can't be anything else than data phase in pppol2tp_xmit, this
function is only called by pppol2tp_write and pppol2tp_netif_output
which are both called by PPP core only when PPP session is up, if
PPP session is UP it means the link protocol is UP as well.
L2TP can't be anything else than data phase in pppol2tp_disconnect,
this function is only called by PPP core only when PPP session is up,
if PPP session is UP it means the link protocol is UP as well.
When we are disconnecting, we should switch to PPP dead phase at the
very end, because this is our final disconnection phase allowing
reconnect, therefore we should switch to dead phase after the link
protocol finished disconnecting.
We are currently switching to dead phase when LCP detected that the link
is down, this is obviously wrong. Fix this flaw by continuing in
disconnect phase until ppp_link_end is called from link protocol.
PPP is just the upper protocol for PPPoE and PPPoL2TP, meaning it is only
started once "E" or L2TP is established. Therefore waiting indefinitely
for LCP packets on the PPP side does not make sense at all, if the lower
level protocol is UP, PPP *MUST* comes up as well or we should restart from
the beginning.
There is two passive modes for PPPoS, passive more, for which we will
try to connect and then listen silently, and silent mode, for which we
will listen silently from the beginning.
Introduce ppp_set_passive and ppp_set_silent so the mode can be chosen
before connecting/listening.
Setting PPP authentication most only be done when the PPP PCB is in the
dead phase (i.e. disconnected). This is safe to access the PPP PCB
members while the session is down, therefore providing a thread-safe
function of it is meaningless and it might even be misleading.
All our new ppp_set_* functions do not have their equivalent
pppapi_set_* functions and they are not going to have them. At least
we make ppp_set_auth consistent with all others ppp_set_*, so that it
doesn't look like special.
Helper function to setup MPPE (Microsoft Point to Point Encryption) for
a PPP link. Allows enabling/disabled MPPE itself, enabling/disabling
stateless support, and whether we are willing to negotiate 40-bit
and/or 128-bit encryptions.
